Where Is The Blower Motor on a Furnace?

No comments

What is A Blower Motor?

If you’ve ever wondered how the hot air that your furnace makes gets to you, then you can thank your blower motor. The blower motor is a critical component of the furnace that takes care of turning a fan that will then circulate warm air from your furnace into your home. Without a working blower motor, you furnace will simply not heat your home.

There are two types of blower motors that you could have. Your home furnace will have either a variable or single speed blower motor. While both will keep you warm and comfortable, they function in different ways. A single seed motor will turn on and off depending on the setting of your thermostat. While a variable speed blower will change speeds to help keep a consistent flow of warm air through your home.

Evam CanadaWhere Is The Blower Motor on a Furnace?
read more

How To Turn On A Furnace

No comments

If you have an automatic furnacing turning it on can be as simple as setting the thermostat to the desired temperature and simply pressing the on button for heat. As easy as this is to do on a cool day you don’t want to do this before you have done a few steps.

Performing some basic furnace maintenance will ensure that you have a functioning furnace to heat your home when you need it. Don’t wait until a cold winter day to get your furnace ready. Consider starting your regular furnace maintenance in the early fall or end of summer to ensure that it is ready to go, and you won’t be caught in the cold.

What to do before turning on your furnace?

Before turning on your furnace for the winter make sure you have completed the following tasks. To help you stay on top of your regular furnace maintenance we have created a DIY furnace maintenance checklist. Use this list to keep yourself on a regular maintenance schedule and ensure you don’t miss any important steps.

Cleaning – Cleanliness is important for your furnace. A clean furnace will function more efficiently and will last longer. Cleaning your furnace is as easy as taking a vacuum to the exterior of your furnace and changing the filter. Make sure that the area surrounding your furnace is clean and clear of any debris. Consider getting your ducts cleaned as part of your yearly maintenance routine.

Damage – Check the exterior of your furnace for any signs of damage. If you have obvious signs of damage to your furnace you may wish to contact a technician before turning it on.

Inspection – Inspect your furnace to ensure that all components are in working order, check for leaks in ductwork and issues with your unit.

What if my pilot light is out?

If your pilot light is out you will be required to relight the pilot light before you will be able to turn on your furnace. Although this is a necessary step you should still follow the steps above to make sure your furnace is ready before attempting to relight the pilot light.

Pay extra attention to cleaning and damage when looking at relighting your pilot light. Your pilot light may have gone out due to dirt or damage. Contact a technician if you require assistance in relighting your pilot light and always call your natural gas provider if you smell gas.

Should I contact a technician?

If your furnace is clean and in working order you should be able to set your furnace to your desired temperature. But if you have any concerns or need help with furnace maintenance or repairs it may be a good idea to call a qualified technician to help.

It is a good idea to get a yearly tune up for your furnace to ensure it runs effectively and safely throughout the winter months. Remember that keeping your furnace and surrounding are clean is a great way to stay on top of furnace maintenance.

Evam CanadaHow To Turn On A Furnace
read more

Evam Canada’s Complete Guide to Furnace Noises

No comments

If you’re a home owner, you’ve likely found yourself thinking, “why does my furnace make a loud noise?” on many occasions. There are many different types of furnace noises you might encounter, from clicking and popping noises to humming and buzzing sounds. Certain sounds only happen when your furnace starts up, while others occur during regular use. Though some of these sounds are part of your furnace’s normal operation, they can be indicators of both minor and major problems.

The exact cause of these strange – and often annoying – noises can vary depending on the model, condition, and age of your furnace. However, by listening carefully to the sounds made by your HVAC equipment, you can discover clues as to where the noises are coming from and what might be creating them.

In this article, we’ll explore a number of the most common furnace noises you might be experiencing and their potential causes.

Furnace Makes Loud Noise When Igniting

If your gas furnace is making a loud noise when starting (such as a “boom” or “bang” sound), there are typically two main culprits.

The first is a fairly minor problem, which is caused when your furnace starts up the metal ductwork in your HVAC system expands as air begins to move through it. This is the same reason that you might experience your furnace making a knocking noise. We recommend replacing your air filter, opening heat registers around your home and having your ducts cleaned to minimize the noise. If this does not resolve the noise issue when turning on your furnace, it is best to call in a professional to find a solution.

The second cause of loud noises when your furnace ignites is delayed gas ignition. This is a much more serious issue. In this scenario, gas has time to build up in the furnace before it is ignited, causing a much larger “boom” than expected when the gas is ignited immediately. This can result in damage to your furnace’s heat exchanger, which can be very costly to repair. Entrust the troubleshooting of this issue to a pro for your personal safety.

Furnace Fan Noise

One of the top sounds experienced by home owners is the furnace blower fan making noise. When your furnace fan is making noise, it may be dirty or dusty and in need of a good cleaning. While this is an easy way to start diagnosing your furnace fan noise, there are several other causes of fan sounds. A loose drive belt could be causing the fan to operate improperly and make excessive noise as it spins unevenly. If you feel comfortable, you can replace the belt with a new one as indicated in your furnace manual.

Should you notice a furnace exhaust fan noise, it is important to address the problem as soon as possible. This furnace component draws toxic exhaust fumes created by the fuel source (natural gas or oil) out of your home, so it is critical that it functions correctly. While you can examine the exhaust fan for dirt and debris or a loose fan belt, we recommend that a professional diagnose your furnace exhaust fan noise and repair it immediately.

Furnace Clicking Noise

A furnace making a clicking noise while operating normally can indicate a couple of different problems. First, the motor bearings or other smaller-sized parts within your furnace could be moving during operation. Second, the furnace’s inducer fan may make a clicking sound as it operates, especially if it is loose or clogged with dust or debris. Regular furnace maintenance can help prevent these types of issues and reduce annoying clicking sounds.

If a furnace makes a clicking noise when starting, you may be dealing with a more serious ignition system malfunction. Your pilot light may not be working properly and can fail to ignite altogether, making clicking sounds as it attempts to spark a flame.

This furnace popping noise can also be the result of a clogged ignitor or clogged gas valve, both of which can indicate major problems. Your furnace’s flame sensor could also be sensing a problem in your system, shutting off the gas at startup for safety reasons. We highly recommend that you allow a professional to troubleshoot these issues, which can be very dangerous for DIY-ers to handle on their own.

Furnace Blower Motor Noise

Furnace blower motor rattling noises can become annoying fast. When your furnace blower is making noise like humming, screeching, or thumping, it can be a sign of wear or damage. You may be dealing with a bad belt, a problem with the motor bearings or even a broken part. No matter what type of noise you hear, it is best to shut your furnace down right away so you can look for the cause.

Furnace blower noise reduction is one of the top concerns of our customers. Sometimes, there is nothing really wrong with your blower motor, it is just too loud for your liking! In this case, a furnace repair expert can examine the blower motor and find a solution for reducing the noise without compromising the efficiency of your equipment.

Furnace Humming Noise

Is your furnace making a loud noise while running? Humming sounds are one of the primary concerns of home owners dealing with a noisily running furnace. When your furnace is making a humming noise, there are several components that may be the source:

  • A Worn or Failing Motor – Motor failure is the likely cause if you notice a humming sound appear suddenly. This is a sign that your furnace is about to stop working, so call a furnace repair technician as soon as possible.
  • Loose Ductwork – As air passes through your HVAC system, it can vibrate the ducts and cause a humming sound. Try securing the joints between ducts with extra sheet metal screws and duct tape, or use additional straps to secure ductwork to your joists.
  • Electrical Transformer – As electrical current moves through your furnace’s transformer, it can make a humming noise that can be loud, but not dangerous. If you wish, you can try tightening the bolts that secure it to attempt to reduce the humming sound.
  • Loose Parts – Over time, components can become loose from vibrations, resulting in your furnace making a loud humming noise. Check that all screws are secure and bolts are tightened.

Furnace Buzzing Noise

A furnace vibration noise is often caused by an unbalanced blower motor. If your furnace is making a loud buzzing noise, it may be the result of an off-kilter blower. Check the blower motor and fan for obstructions or excessive dust and clear them away. A buzzing sound can also indicate a failing blower motor, so be sure to have an HVAC technician take a look at it if you are concerned.

A furnace buzzing noise when running could also be caused by loose access panels or components of your furnace’s housing. While the furnace is running, these loose parts can vibrate excessively, creating an annoying buzzing sound. This issue can be resolved by tightening all screws that secure the access doors to the exterior of the furnace.

As mentioned above, you may hear a buzzing-type sound coming from the transformer box located near your furnace. This is completely normal, but you can check to see that it is securely mounted to reduce the buzzing noise and prevent future damage to the transformer box.

Furnace Making High-Pitched Noise

Hearing a high-pitched noise when your furnace is running? Start by looking at the blower speed. Many modern furnace models allow you to adjust the speed of the blower fan, which may eliminate the sound you’re experiencing. Contact an HVAC specialist to adjust this setting for you.

You could also be hearing a high-pitched whistling sound from your air vents. This is caused by low return air flow, meaning that your furnace’s blower is struggling to pull in air. To resolve this problem, you can replace or clean your dirty air filter, check for blocked or dusty air return vents throughout your home, and open any supply vents that are closed. You may also need your ductwork cleaned and checked for any large debris by a professional duct cleaning company.

Furnace Draft Inducer Blower Noise

Furnace draft inducer blowers push air and gases out of your furnace and towards outside, improving the quality of the air that moves through your furnace. A furnace inducer motor noise can be one of the main problems home owners experience with this component, which is mostly found in newer, high-efficiency furnaces.

If you hear noises coming from your draft inducer blower, it likely needs total replacement. This part is unfortunately difficult to rebuild, so your best option is to have a new unit ordered and replaced by a professional.

Furnace Making Grinding Noise

A furnace making a grinding noise is definite cause for concern. Loud grinding or scraping sounds can indicate that metal is rubbing against metal somewhere within your furnace. The most common cause of this noise is a problem with the fan or blower wheel rubbing against other interior parts. A part is most likely broken or loose and must be replaced. Another cause of a grinding sound could be worn bearings, which require inspection and lubrication. Keep in mind that not all of today’s furnace motors require oiling, so check your manual.

If you hear a grinding sound, shut off your furnace immediately to prevent any further damage. Next, call an HVAC repair company for help in diagnosing and repairing the damaged components.

How to Reduce Furnace Noise

If you’re left wondering how to reduce furnace noise for good, it’s time to call in a professional. Furnace noise reduction can be achieved through any number of repairs or adjustments, but an expert must first correctly diagnose the problem.

Didn’t see an explanation for your mysterious furnace noise above? Our trained technicians are highly skilled in determining the source of your furnace noises and repairing or replacing necessary components to get your furnace running quietly again. If you’re tired of your noisy furnace, give Evam Canada a call today at 1-905-624-5544, or contact us online to schedule a repair appointment.

Evam CanadaEvam Canada’s Complete Guide to Furnace Noises
read more

Furnace Ignition Control Module Troubleshooting

No comments

The furnace ignition control module is an essential part of your furnace. It provides power to the furnace blower, and is more reliable than the standing pilot light that is found in older gas furnace models. Because it uses an electronically-controlled ignition to light the burners, it is more energy efficient and generally safer.

However, this does not mean that it is not susceptible to problems. Electronic ignition failure is very common and can prevent your furnace from turning on. Use the following furnace ignition control module troubleshooting tips to help you identify some of the most common gas furnace ignition problems.

First, let’s take a look at the two most common electronic ignition systems:

Intermittent Pilot (IP)
In furnaces with intermittent plot systems, the pilot only ignites the burner gas when the thermostat calls for heat. With this type of furnace, your ignition may not spark at all. Or, perhaps the spark happens but does not light the pilot. Sometimes, the pilot will light but not ignite the burner.

Hot Surface Ignitors (HSI)
In furnaces that use hot surface igniters, electricity passes through a filament and heats up, eventually igniting the gas for the burner. However, this part can malfunction over time due to normal wear, damage due to improper handling, or a too-high electrical current in your home.

Furnace Ignition Control Module Troubleshooting
Modern furnaces feature a circuit board to control the ignition process as well as many of the other complex processes within your heating equipment. An advantage of these circuit boards is that they can often give you clues as to the source of your furnace problem. The circuit board may use LED lights to indicate a specific error code that you can then reference in your furnace manual to troubleshoot problems.

A few simple things to check out include:

  • Turn the igniter off and wait a few minutes before turning it back on to see if the issue is resolved.
  • Examine your furnace filter. A badly clogged filter can cycle your furnace ignition on and off repeatedly, leading to malfunction.
  • Dirty filters, clogged ductwork or a plugged flue can cause limit switches to open when there is excessive heat buildup.
  • Look at the ignition cable to ensure that there are no cracks or breaks, and the connections are clean and secure.

There are many things that can happen during the process of igniting your furnace that can cause the system to fail. From failure to light the pilot to defective sensors and bad blower wheels, any issue will signal to the circuit board that it is not safe to start the furnace. Often, replacing your furnace ignition control module is the solution. If you’ve tried the above furnace ignition control module troubleshooting tips and have not been able to resolve the problem, it’s time to call an expert.

The team at Evam Canada is available to diagnose and repair your furnace problems quickly and effectively with our emergency furnace repair services. Contact us today to schedule a service appointment.

Evam CanadaFurnace Ignition Control Module Troubleshooting
read more

Carrier Furnace Troubleshooting Tips

No comments

Have you discovered that your Carrier furnace isn’t working properly? Don’t panic. Instead, focus on diagnosing the issue with these handy Carrier furnace troubleshooting tips. Once you’ve identified the source of the problem, you can then perform a DIY fix or call in a professional to make the necessary repairs.

Follow these Carrier furnace troubleshooting steps to determine the root of your furnace problem:

  1. Make Sure the Furnace is On
    This might seem like obvious advice, but it’s still worth investigating just in case. Check to see that your thermostat is set to “heat” and is set higher than the current temperature in your home. Next, check that the circuit breaker to the furnace is on. Finally, the power switch for your furnace should be set to “on” as well.
  2. Make Sure Everything is Clean
    Dirt, dust and debris can quickly become the enemy of your furnace and your entire HVAC system if not kept at bay. Start by checking your furnace filter, and clean or replace it so your unit receives maximum airflow. Also check the return air vents around your home, ensuring they are not blocked by furniture or excessive dust.
  3. Listen for Unusual Noises
    Abnormal sounds like furnace vibration noises, furnace exhaust fan noises, rattling or banging can signal a serious problem with your equipment that needs attention right away. If you notice any of these sounds, turn the furnace off immediately and call a furnace repair professional.
  4. Look for a Diagnostic LED

Many Carrier furnace models feature a small LED screen that shows error codes to help you diagnose the source of the problem. If you see an error code, reference your furnace manual or perform some online research to determine its meaning. To find more information about your furnace, look up your model on the Carrier website.

  1. Call a Professional
    In some cases, your Carrier furnace troubleshooting requires the assistance of an expert. If you’ve tried the above troubleshooting tips with no success, or you’ve discovered an error code with a fix that’s beyond your level of expertise, we highly recommend getting in touch with a repair specialist.

Remember that you can’t neglect the key furnace maintenance tasks that will keep your Carrier furnace running smoothly all year around. To prevent issues from the start, we recommend that you undertake both DIY furnace cleaning measures in addition to having a professional regularly service your furnace.

Need an expert to help with your Carrier furnace troubleshooting? The trained technicians at Evam Canada are available to assist with all types of Carrier furnace issues. Whether you are experiencing a minor malfunction or complete shutdown of your HVAC equipment, you can trust our team to handle your repairs with a high level of professionalism.

To schedule an appointment with one of our furnace repair specialists, call Evam today at 1-905-624-5544!

Evam CanadaCarrier Furnace Troubleshooting Tips
read more

Troubleshooting a Gas Furnace: No Heat

No comments

It always seems to happen at the worst time – your gas furnace simply stops heating, and it’s freezing outside! You might find that your furnace is blowing cold air, or perhaps it isn’t blowing any air at all. In either case, you’re likely wondering how you can get it back up and running properly, and fast!

Luckily, there are a number of DIY steps you can take in troubleshooting a gas furnace with no heat. Evam Canada has created this simple checklist to help you through the no heat troubleshooting process:

  • Check your thermostat. This may seem obvious, but if your thermostat is not set to “heat” mode, it won’t heat your home. Try turning the temperature up a few degrees at the thermostat to see if it triggers your furnace to blow hot air.
  • Make sure the furnace is getting power. If the thermostat trick didn’t work, check to see that a breaker hasn’t been tripped at the panel.
  • Some furnaces have a “reset” button located on the indoor component in your basement. Press the button to restart your furnace, which may resolve the issue.
  • Check your furnace filter to see if it is clogged or dirty, which could be blocking air flow throughout the rest of your home. If it is dirty, replace it with a fresh filter.
  • Go around your house and ensure all heat registers are open. If there is any furniture or clutter blocking the registers, clear it away as this can cause your furnace to work harder than necessary.
  • See if the pilot light is out. When troubleshooting a gas furnace with no heat, the pilot light being out is a very common culprit, especially in older models. Re-light it if needed.
  • Check the fuel supply source. Is the natural gas source turned on? A shut off gas supply valve will mean that your furnace cannot run.
  • Examine your ductwork. Major holes or leaks in your ducts could make it seem as if your furnace isn’t producing heat at all. Repair or replace ducts as needed.
  • Check the condensate line. Some newer furnace models will automatically shut off if a sensor determines that the condensate line has become clogged.

Completed the checklist but still have no heat? Evam Canada can get your home cozy and warm again in no time. Our emergency furnace repair services are available in Mississauga and across the GTA so you can restore your gas furnace back to working order.

To book your emergency service or repair appointment now, give Evam Canada a call at 1-905-624-5544.

Evam CanadaTroubleshooting a Gas Furnace: No Heat
read more

Furnace Vibration Noise: Troubleshooting Tips

No comments

Is a furnace vibration noise disturbing your peace and quiet? Noticing a vibration sound coming from your heating equipment is a common complaint we hear from home owners about their old and new furnaces alike. Unfortunately, it can be difficult to pinpoint the exact cause of the vibration, since there are many potential problems that could be causing it.

In order to troubleshoot your furnace vibration noise, there are a number of DIY steps you can take at home. Here, we’ll explain the most common furnace problems that could be the source of the annoying vibration sound. Before shutting off your furnace to examine the problem, try to diagnose exactly where the sound is coming from so you can start your search in that area. Ensure your furnace is turned off completely before you attempt any of the following:

Unbalanced Blower Motor

There could be something off-balance within your blower, causing the fan to make vibrating sounds when it spins. Check the fan and motor for signs of dust or debris build-up or any other kind of obstruction and clear it away to see if the problem has been solved.

Loose Fan Mounts

Loose fan mounts are especially common in older furnace models, which have circulation fans mounted directly to the furnace cabinet using metal supports. When the fan turns on, vibrations occur from the fan and motor as the support rattle. The mounts may be loose or corroded and require tightening and/or replacement to make sure the fan operates smoothly again.

Loose Access Panels

Loose parts on your furnace’s housing can cause an annoying vibration sound when the furnace is running. You can fix this problem by carefully tightening all bolts and screws on the exterior of your furnace. Check access panels to make sure they are closing properly and sitting in their frame correctly.

Vibrating Duct Work

Should your furnace be vibrating near duct work, it could be the ducts themselves causing the sound as air passes through them. You can test to see if your ducts are the source of the noise by putting pressure on the side of the duct with your hand. If this stops the vibration, you can check the seams and seals of your ducts to repair any loose connections.

If your furnace vibration noise is bothering you, put a stop to it by contacting Evam Canada. Our emergency furnace repair technicians are on hand to diagnose your furnace’s issue and restore it to normal working order.

To book your service appointment now, give Evam Canada a call at 1-905-624-5544 or contact us online.

Evam CanadaFurnace Vibration Noise: Troubleshooting Tips
read more

Furnace Exhaust Fan Noise: Troubleshooting Tips

No comments

When your HVAC system is making unfamiliar or loud sounds, it can be a cause for concern. Not only are furnace exhaust fan noises disruptive, they may also indicate potential problems within your furnace that need to be repaired immediately.

A furnace exhaust fan in need of repair is of particular concern, since it is such a critical component of your system. The exhaust fan is designed to draw out the exhaust fumes that are created when the natural gas or oil fuel source is burned to heat your home. If you notice unusual sounds coming from your exhaust fan, we recommend performing these steps to troubleshoot the issue:

  1. Inspect the Fan
    While your furnace is powered on, take a look at how your fan is running to see if you can pinpoint exactly where the noise is coming from. This will help you diagnose the issue and know exactly where to start looking.
  2. Clean the Fan
    After turning off your furnace completely, examine the fan for dirt and debris, and clean it if necessary. Also check that the fan turns easily. If you find it is stiff, lubricate the fan wheel with an appropriate lubricant. Check your furnace’s manual for further details.
  3. Look for a Loose Belt
    A loose fan belt can cause the fan to turn off-balance and make unwanted noises. Replace a loose belt with the correct model, ensuring it is correctly seated in the belt groove so that the fan can rotate smoothly.
  4. Poor Installation
    Your exhaust fan and motor may have been installed incorrectly, causing abnormal noises during operation. If you suspect that it has been installed poorly, have a service technician come and inspect the exhaust fan and motor to recommend a solution.
  5. Worn-Out Motor
    A worn-out exhaust fan motor can cause the components to operate at less-than-optimal performance. In most cases, a repair to your exhaust fan motor requires a complete replacement of the fan and related components, which should be handled by a pro.
  6. Replace
    If the above DIY furnace repair steps did not address the furnace exhaust fan noise, it’s time to call in a professional. You may require a full replacement of the exhaust fan components to resolve the noise issue and restore your furnace to its maximum efficiency.

Evam Canada is here to help you put an end to annoying furnace exhaust fan noises. If you’re still not sure how to fix your noisy equipment, our emergency furnace repair specialists can help and make your home comfortable and quiet again.

Call Evam Canada at 1-905-624-5544 or contact us online today to schedule a repair appointment for your furnace.

Evam CanadaFurnace Exhaust Fan Noise: Troubleshooting Tips
read more

Furnace Troubleshooting: No Heat!

No comments

Finding that your furnace is failing to produce warm air is one of the biggest issues home owners can encounter when it comes to their HVAC system. Your furnace may be running, but blows cold air instead of hot. Or, your furnace may not even turn on at all.

In either case, furnace troubleshooting no heat-related problems is something you’ll want to get fixed fast, especially during the colder months of the year. Read on for our tips on diagnosing and resolving your furnace troubleshooting “no heat” issue:

Furnace Troubleshooting: No Heat

Is your furnace running, but simply not heating? If you find that cold air is coming from your registers instead of warm, your furnace is likely just recirculating the air within your home without heating it up first. Run through the following checklist first to see if any of these problems are the culprit:

  • Is your thermostat set to heating? Try raising the temperature a few degrees and see if the furnace starts blowing warm air.
  • Are your registers open? Make sure they are open and not blocked by furniture.
  • Is the breaker that controls your furnace tripped? If so, reset the breaker.
  • Is your furnace filter dirty? Clean or replace the air filter.
  • Is the pilot light out? Re-light it if you are comfortable doing so. If not, call your local HVAC company for help.

Once you’ve double-checked all of these potential issues and ruled each of them out, it’s likely time to call in a professional. Further fixes and repairs can be dangerous and should only be performed by an experienced HVAC technician.

Furnace Troubleshooting: Furnace Won’t Turn On

You might find that not only is your furnace not heating, it is not turning on at all. If this is the case, start by making sure the furnace is set to “ON” and its breaker is not tripped. You’ll also want to check that the condensate pan is not full, and that the furnace’s air filter is clean – both of these issues may result in your furnace not turning on. If after checking all of these areas your furnace is still not turning on and blowing hot air, turn to a professional for assistance with troubleshooting.

If you still haven’t resolved the problem with your furnace, remember that your local Mississauga furnace troubleshooting experts are here to help. Evam Canada’s trained furnace repair specialists have experience with all makes and models, and will fix your heating problem so you can enjoy a warm and cozy home.

For a service or repair appointment, call us today at 905-624-5544.

Evam CanadaFurnace Troubleshooting: No Heat!
read more

What to Do if Your Furnace Blower Motor is Making Noise

No comments

Strange noises coming from your HVAC system are never a good sign. An unusual sound can cause home owners to worry, leaving them wondering if there is something majorly wrong with their equipment. If your furnace blower motor is making noise, try not to panic. There could be several explanations for the noise, and even some you may be able to fix on your own at home.

Here, we’ll take a look at some of the common furnace blower motor noises and potential fixes to get your furnace running smoothly again:

Humming Sound

A humming sound is one of the most common blower motor noises reported by home owners. Your first step after noticing this sound should be to turn off your furnace’s motor and let it cool down. Once it is safe to touch, examine the motor and look for any obvious signs of wear or breakage. If there is no damage, try lubricating the motor and restarting the furnace to see if the noise has disappeared.

Screeching Sound

A screeching or squealing sound coming from your furnace blower motor could mean there is a bad belt or an issue with the motor bearings. Replace the belt with the correct part for your furnace if necessary (Reference your manual to be sure, or call a furnace repair specialist). You can also add lubricant to the bearings to eliminate the screeching sound.

Thumping Sound

A thumping, banging or clanking sound could be the result of a loose or broken off part in the motor or blower assembly. Should you hear one of these noises, turn off your furnace immediately. Call a professional to examine and repair or replace the broken part before you turn your furnace on again.

Loud Blower Fan

Sometimes, your furnace blower motor is just simply too loud and becomes a nuisance. If this is the case, you may have issues with your ductwork, or might need to reduce the fan speed of your furnace. In either case, it’s best to have a pro take a look at your system and determine if there is a way to reduce the noise it makes without decreasing efficiency.

Still find your furnace blower motor making noise? Call Evam Canada now for emergency furnace repair at 905-624-5544. Our experienced HVAC technicians are available to diagnose and repair the cause of the noise and ensure your equipment is operating safely.

Evam CanadaWhat to Do if Your Furnace Blower Motor is Making Noise
read more