7 Furnace Maintenance Tasks You Can Do Right Now

No comments

Furnace maintenance is an important part of prolonging the life of your HVAC equipment. During the heating season, your furnace works hard to keep your home a comfortable temperature, delivering warm air to every room of your house. But if it keeps working hard with no maintenance, you could encounter big trouble.

No homeowner likes discovering that their furnace has stopped working. That’s why you should regularly perform simple DIY furnace maintenance tasks to prevent a major breakdown when you least expect it. We’ve assembled this list of quick tips that you can do in just a few minutes to keep your furnace up and running:

  1. Change the Furnace Filter
    After months of use, your furnace filter can become extremely clogged and full of dust that prevents proper airflow. Poor airflow reduces the efficiency of your furnace and can even cause the heat exchanger to overheat. Change your furnace filter monthly when your furnace is in use for maximum efficiency.
  2. Vacuum the Interior of the Furnace
    Open the front panel of your furnace and carefully use a vacuum with a hose attachment to clean all dust and debris from the gas burners and crevices within the interior of your equipment.
  3. Inspect the Fan Belt
    Over time, your furnace’s fan belt can deteriorate or become loose. The fan belt is an important component, which drives the blower. All furnace maintenance checklists should include an inspection of the fan belt for cracking, fraying or loosening. Replace the belt if necessary.
  4. Oil Bearings
    The motor and blower shaft bearings will need to be lubricated regularly. Remove the oil caps and apply a few drops of machine oil to the bearings and motor without over-lubricating. Don’t forget to replace the caps!
  5. Check the Outside Exhaust Vent
    Your furnace’s exhaust vent carries harmful carbon monoxide outdoors. Ensure that there is no debris, snow or ice blocking the vent. A blockage can cause a furnace failure and can be hazardous to your health.
  6. Look for Leaks
    A furnace leak can be incredibly dangerous and requires expert repair. Examine the exhaust flue inside your furnace, checking for small holes that could potentially leak carbon monoxide. While small holes can sometimes be repaired with foil tape, keep in mind that this is only a temporary fix.
  7. Clean Floor Vents
    Floor vents often gather dust and debris. Make a point to examine each floor register throughout your home and vacuum out any gunk. Make sure all vents are clear and open to ensure consistent airflow throughout your home.

Need expert help with furnace maintenance? The heating technicians at Evam Canada can ensure your furnace is kept clean and works efficiently all season long. Contact us online or call us at 1-905-624-5544 to book your furnace maintenance appointment today!

 

Evam Canada7 Furnace Maintenance Tasks You Can Do Right Now
read more

6 Furnace Cleaning Tips

No comments

An often overlooked part of home maintenance is furnace cleaning, but avoiding it can have a major impact on the cleanliness and overall health of your home. A clean furnace means cleaner air for you and your family. Between regular furnace maintenance appointments, we recommend you keep your own cleaning schedule for maximum furnace efficiency.

The following furnace cleaning tips will ensure your heating equipment runs properly, efficiently, and can deliver healthy air throughout your house. With a cleaner furnace, you’ll be saving money and increasing your comfort level.

  1. Cleaning the Filter
    The easiest task on our furnace cleaning tips list is to replace or clean your furnace filter. You should always replace your filter at the beginning of the heating season and about once a month during peak use. Your clogged filter should be replaced with a brand new filter of the same size and type.
  2. Clean Around the Furnace
    Furniture, boxes and other objects placed close to your furnace can cause its efficiency to suffer. Items placed too close to your heating equipment impact its breathing room, and could result in overheating. Use this as an opportunity to tidy up around your furnace.
  3. Clean the Vents
    Debris and dust can also form in the vents on the front panel of your furnace. Blocked air flow can cause your furnace to overheat and work less efficiently. Clear any blockages here with a vacuum. It is also worth vacuuming the air vents throughout your home to be sure they are all free of dust.
  4. Clean the Outside
    Next, clean the exterior of your furnace and related equipment. Use a duster to remove cobwebs, dust and other debris from the outside of your furnace. Lingering dust and residue on the outside of your furnace can cause an unpleasant “burning” smell when your furnace heats up for the first time.
  5. Clean the Blower
    Before attempting this important cleaning tip, shut off your furnace. This is essential for your safety. Open up the front panel of your furnace and carefully vacuum out any debris and dust that has accumulated around the blower. Be especially careful around any electronic components to avoid damage that could result in a short circuit.
  6. Duct Cleaning
    As part of your furnace cleaning, it’s important to consider the cleanliness of your ductwork. If it’s been a while since your ducts were cleaned, contact a local reputable duct cleaning service to perform this maintenance for you.

At Evam Canada, we suggest that you schedule regular furnace maintenance and repair to keep your heating equipment in top shape. Furnace cleaning is easy when an expert technician takes care of the bigger tasks for you!

Call us today at 1-905-624-5544 to book your maintenance appointment and get your furnace working efficiently again.

Evam Canada6 Furnace Cleaning Tips
read more

What to Do if Your Furnace Blower Motor is Making Noise

No comments

Strange noises coming from your HVAC system are never a good sign. An unusual sound can cause home owners to worry, leaving them wondering if there is something majorly wrong with their equipment. If your furnace blower motor is making noise, try not to panic. There could be several explanations for the noise, and even some you may be able to fix on your own at home.

Here, we’ll take a look at some of the common furnace blower motor noises and potential fixes to get your furnace running smoothly again:

Humming Sound

A humming sound is one of the most common blower motor noises reported by home owners. Your first step after noticing this sound should be to turn off your furnace’s motor and let it cool down. Once it is safe to touch, examine the motor and look for any obvious signs of wear or breakage. If there is no damage, try lubricating the motor and restarting the furnace to see if the noise has disappeared.

Screeching Sound

A screeching or squealing sound coming from your furnace blower motor could mean there is a bad belt or an issue with the motor bearings. Replace the belt with the correct part for your furnace if necessary (Reference your manual to be sure, or call a furnace repair specialist). You can also add lubricant to the bearings to eliminate the screeching sound.

Thumping Sound

A thumping, banging or clanking sound could be the result of a loose or broken off part in the motor or blower assembly. Should you hear one of these noises, turn off your furnace immediately. Call a professional to examine and repair or replace the broken part before you turn your furnace on again.

Loud Blower Fan

Sometimes, your furnace blower motor is just simply too loud and becomes a nuisance. If this is the case, you may have issues with your ductwork, or might need to reduce the fan speed of your furnace. In either case, it’s best to have a pro take a look at your system and determine if there is a way to reduce the noise it makes without decreasing efficiency.

Still find your furnace blower motor making noise? Call Evam Canada now for emergency furnace repair at 905-624-5544. Our experienced HVAC technicians are available to diagnose and repair the cause of the noise and ensure your equipment is operating safely.

Evam CanadaWhat to Do if Your Furnace Blower Motor is Making Noise
read more