Why is My AC Not Working?

No comments

If warm weather has arrived and you find that your air conditioner simply won’t fire up, or isn’t cooling to your preferred temperature, you’ll likely find yourself wondering, “Why is my AC not working?”

However, fixing the problem is not as simple as turning your AC unit off and on again. In order to properly diagnose the issue, you should follow these troubleshooting steps to really determine why your air conditioner is not working, and whether or not a professional is required to fix it.

Why is My AC Not Working? 6 Troubleshooting Steps

If your air conditioner is not working at all, or is not working at peak performance, follow these steps:

  1. Check your Thermostat
    Many times, when a home owner asks themselves, “Why is my AC not working?”, the problem is caused by an issue with their thermostat. Make sure that your thermostat is set to cool and the desired temperature is set to a lower temperature than the room currently sits at.
  2. Check the Electrical Panel
    Ensure that your AC unit is indeed receiving power by checking the breaker associated with it. If the breaker is tripped, reset it by shutting it off and turning it on again. Also look for any signs of damage to the wiring that may have occurred in the off season.
  3. Check the Evaporator
    If the unit’s evaporator is dirty, carefully clean it and check for blockages. Located above the furnace in the plenum, open the evaporator and clean the underside with a stiff brush. If you are not comfortable cleaning this component, a professional can assist you.
  4. Check the Condenser
    If your AC unit is running, but is not blowing cold air, head outdoors to see if the condenser is dirty or blocked by grass, leaves or other debris. Clean and remove any blockages before you turn the unit on again.
  5. Check the Drain Pan
    The interior portion of your AC unit has a drain pan to collect condensation. If this pan is overflowing, you’ll want to look for a block or kink in the drain line and make sure the pump that moves the water is functioning properly.
  6. Check the Compressor
    If your AC unit is still not working, you may have an issue with the compressor or need a top-up of your refrigerant. In either case, a professional will need to assess and fix these problems.

Still wondering, “Why is my AC not working?” It’s time to call a pro. The expert air conditioning technicians at Evam Canada would be happy to help you troubleshoot and repair any AC unit issues you may have encountered. Call us today

Evam CanadaWhy is My AC Not Working?
read more

How to Repair Air Conditioners

No comments

If you’re researching how to repair air conditioner problems, you’ve come to the right place! The experts at Evam Canada have created the following how-to guide to assist you in diagnosing your air conditioner’s problems and perform common repairs to get it working again.

While your safest bet is to call a professional air conditioning service technician to look at your AC unit, there are some do-it-yourself repairs you can try to fix your cooling system. Here, we will outline how to repair air conditioner issues that are minor in nature:

Check for Ice

If your air conditioner is not cooling sufficiently, look for ice on the outdoor portion of your unit. If you see ice build-up, shut off your cooling system and give it several hours to defrost. When defrosting is complete, turn the unit on again. It should now be cooling more effectively, but if you’re still not satisfied with cooling levels, call a professional.

Look at the Overflow Drain Pan

The overflow pan is designed to catch condensation from your air conditioning unit, and is typically located at the bottom of your indoor AC unit. If you notice that it is leaking, look carefully for any signs of damage, especially at the edges and corners. You can repair any small holes and cracks with waterproof epoxy glue, or replace the overflow drain pan entirely.

Check the Condensate Line

The condensate line drains any accumulated condensation from the overflow drain pan directly into a drainpipe or outdoors. Should this line become clogged, water will back up and flood the overflow pan, causing a leak. If you suspect a clog, use a wet/dry vacuum to suck it out and clear the line. Check the line periodically throughout the cooling season to avoid surprise leaks.

Repair Air Duct Leaks

While not directly part of your air conditioning equipment, leaks in your air duct system can have a major effect on your AC unit’s ability to cool your home efficiently. Patch any small holes you come across with duct tape or sealant to enjoy more even cooling throughout all rooms in your house.

Check the Capacitor

If you find your air conditioner is humming, yet the fan is not spinning, you likely have an issue with your capacitor. The capacitor is what initially boosts the fan motor on start up. If the capacitor is blown, the fan can’t get going. Replacing the capacitor with an appropriate new one for the make and model of your AC is a basic fix, but it is highly recommended that you leave this job to a pro if you are not comfortable.

Still left wondering how to repair your air conditioner? Give us a call today at 1-905-624-5544. Evam Canada would be happy to help service your air conditioner, or recommend and install a new unit if required.

Evam CanadaHow to Repair Air Conditioners
read more

How to Fix Air Conditioner Problems

No comments

Are you looking for answers on how to fix air conditioner problems at home? While not every air conditioning repair can be performed by a novice, there are many smaller fixes and troubleshooting you can try on your own to solve some of the most common AC issues.

Here, our team has compiled this list of air conditioning fixes you can do at home. These tips can help you diagnose minor issues, or uncover larger problems that should be resolved by a professional to keep your home’s climate comfortable.

Warning: Make sure the power to your air conditioning system is turned off before performing any repair or maintenance work!

  1. When wondering how to fix air conditioner problems, most home owners head straight for the outdoor components of their AC system. But don’t forget to investigate the indoor portion of your air conditioner! Examine your furnace filter to make sure it isn’t clogged, and check to see that the registers in your house are open. Replace filters and open registers as necessary.
  2. If your air conditioner just won’t turn on, double-check to ensure a tripped breaker or blown fuse is not to blame. Replace fuses and turn breakers off and on again to see if your AC unit starts up.
  3. Head outside to check the condenser. If the condenser coils are clogged, this could prevent your system from working at its most efficient. Turn your AC unit off at the breaker, then spray down the coils using your garden hose and a strong nozzle to remove debris. Be sure to clear the immediate area of any grass, leaves or dirt that may have accumulated and are blocking air circulation.
  4. If filters have been clogged, reduced airflow may have caused the evaporator coil to form ice buildup. Thaw the evaporator coil by switching your system to “fan only” and let the blower fan run for a couple of hours. Once the ice has thawed, turn the AC back on to test it. If your system starts up, you may have solved the problem.

If the above repairs have not managed to resolve your AC unit’s issues, it’s time to call in a professional. The certified experts at Evam Canada know how to fix air conditioner problems safely, performing the job right the first time so you can enjoy a more comfortable home.

If you need air conditioning repair in Mississauga and the GTA, contact us today to book an appointment! We also offer convenient maintenance plans to make sure you’re never left without your air conditioner on a hot summer day.

Evam CanadaHow to Fix Air Conditioner Problems
read more

Central Air Conditioner Maintenance Guide

No comments

Central air conditioner maintenance is essential to prolonging the life of your cooling system and in making sure it continues to cool your home evenly and effectively. Each and every year (and especially before cooling season begins!) you should perform a few simple maintenance tasks to ensure your AC unit is in top shape.

Maintaining your air conditioner doesn’t have to be difficult. Set aside a few hours to work through these steps so you can get the most out of your cooling equipment. The following is Evam Canada’s simple central air conditioner maintenance guide:

  1. Change the Filter
    Dirty and clogged filters are the number one cause of air conditioner problems. A dirty filter can restrict air flow, leading to decreased efficiency of your cooling system. A clogged filter can even result in your system icing up. Check your filter often and clean or replace it every month or two, especially in peak cooling season.
  2. Check the Thermostat
    If your thermostat is battery operated, replace the unit with fresh batteries to avoid costly repair visits. Many home owners blame their air conditioner in cases where their thermostat is really the culprit!
  3. Clean Up
    A key component of your central air conditioner maintenance is a thorough cleaning of the exterior unit. If you haven’t cleaned it recently, it is likely quite dirty. Carefully clean the fan blades with a high pressure stream from a garden hose, taking care to avoid bending or breaking any fins as you remove debris. Also clear away any other debris like leaves, twigs and grass that may be surrounding the outdoor air conditioning unit.
  4. Level It
    As the concrete pad on which your AC unit sits settles, it can become unlevel. If your air conditioner tilts to one side, this can impact the compressor inside, making it more susceptible to wear and tear. Use a hand level to check your unit and made adjustments using shims to return it to the proper position.
  5. Perform an Overall Check-Up
    Take a visual inventory of your air conditioner’s components, such as fuses, breakers, wires, connections, drain lines and more. Examine these parts for any signs of wear or damage that could cause your system to malfunction. If you notice any issues, call in a professional air conditioner repair technician immediately for assistance.

At Evam Canada, we offer convenient central air conditioner maintenance plans to keep your AC unit working its best! Our licensed technicians are experienced with all air conditioner makes and models, and can handle everything from minor service calls to total repair or replacement of your unit. To book a maintenance appointment today and get a check-up on your system, contact Evam Canada.

Evam CanadaCentral Air Conditioner Maintenance Guide
read more

AC Maintenance Cost

No comments

In order to cool your home efficiently during the warmer months, your air conditioner should be in peak condition. Whether you have recently invested in a brand new cooling system, or have been neglecting your existing air conditioning unit, there is no time like the present to start investigating AC maintenance costs.

Opting for regular professional maintenance of your air conditioner can help extend its life, lower the risk of costly repair bills, and help you and your family stay comfortable on the hottest days of the year.

Keep in mind that your AC maintenance cost will vary depending on the specific model, size, location and condition of your AC unit. The following is a general breakdown of typical air conditioner maintenance and associated pricing.

One-Time Maintenance

One-time maintenance is offered by many HVAC contractors. Home owners may choose to schedule an appointment to have their AC unit serviced if they feel it is not working as efficiently as it should, or if they are encountering a specific issue. If you opt for infrequent, one-time servicing, costs are likely to be higher than with scheduled preventative maintenance plans. Expect to pay a few hundred dollars per visit, and more if any major repairs are required.

Seasonal Maintenance

Seasonal maintenance is a popular choice for home owners looking to keep their air conditioner working well. By having your unit serviced in the spring at the beginning of the cooling season, and again the fall when it’s time to shut down your air conditioner, you can rest easy knowing that your cooling system is ready to perform when you need it.

Maintenance Plans

Maintenance plans are often one of the most affordable options when it comes to your AC maintenance cost. By purchasing a maintenance plan from a certified expert technician, you can ensure that your AC unit is checked on a regular basis to prevent big problems from happening at the most inconvenient times. Maintenance plans like these are usually charged on a monthly basis for a nominal cost, especially if you purchase a plan at the time of installation.

At Evam Canada, we offer affordable AC maintenance services to keep your air conditioner running at peak efficiency for the duration of the cooling season. If your AC unit requires maintenance, needs repair or you’d like to inquire about a brand new air conditioner, get in touch with us today!

Evam CanadaAC Maintenance Cost
read more

Air Conditioner Not Turning On

No comments

Many of us have been there. You go to start up your cooling system for the season, and you’re left wondering, “Why is my air conditioner not turning on?”

While this can feel very frustrating (especially on a hot day!), there are a few DIY steps you can take to troubleshoot the issue at home. So, before you call an air conditioner repair specialist, try the following to see if you can get your AC unit back up and running:

  1. Look at Your Thermostat
    Your air conditioner may not be turning on if your thermostat is set to “heat” rather than “cool”. If it is set to heat, it simply won’t turn on. Turn your thermostat to cool and lower the temperature by at least 5 degrees to see if your unit will turn on.
  2. Check the Breaker
    If the circuit breaker has been tripped, your air conditioning unit will not turn on. Check the panel and reset the breaker, making sure to flip the breaker all the way to the “off” position and returning it to “on”.
  3. Check the Unit’s Off/On Switch
    Many air conditioners have a dedicated shut-off switch near the outside portion of the unit. Make sure that this switch is in the “on” position. There’s also a switch located at the indoor portion of the unit, which often looks like a light switch. Make sure this switch is also in the “on” position.
  4. Replace the Air Filter
    If you’re wondering, “Why is my air conditioner not turning on?”, think about the last time you changed your air filter. A dirty air filter can block air from return to your AC unit, thereby reducing the air flow over the evaporator coil and causing it to ice over. This freezing can shut off the air conditioner’s compressor so it does not become damaged.
  5. Check the Condensate Drain Line
    The line that drains condensation from your air conditioner can become clogged with algae blockages and other debris. This can trip a safety switch that turns off your AC altogether. Use a wet/dry vacuum to suck out any obstructions that may have formed and attempt to turn your system on again.

Still find yourself asking, “Why is my air conditioner not turning on”? Our professional technicians can help. Evam Canada offers comprehensive AC maintenance and repair services to keep your air conditioner working like it should. If you need help troubleshooting your air conditioner problems,  get in touch with us today!

Evam CanadaAir Conditioner Not Turning On
read more

Bryant AC Troubleshooting Tips

No comments

Bryant air conditioners are one of the most trusted and most popular systems on the market today for both residential and commercial customers. Since 1904, Bryant has created reliable and efficient HVAC equipment to help its customers be more comfortable in their homes.

If you’re looking for assistance when it comes to Bryant AC troubleshooting, we’re here to help. The Evam Canada team recommends following these Bryant AC troubleshooting tips before calling a professional to eliminate some of the most common Bryant air conditioner problems.

  • If your air conditioner does not turn on, look for the disconnect switch and check that it is in the “on” position. Typically, Bryant AC units have a mounted switch outdoors near the condenser unit. It should look like a grey box mounted to the wall, approximately 8” wide by 16” high.
  • Check that a breaker has not been tripped inside. Flip the breaker connected to your air conditioner off and then on again, and see if your system starts up.
  • Head over to your thermostat and make sure it is set to “cool” rather than “heat”. Try lowering the temperature by a few degrees to see if the air conditioner turns on.
  • Within the indoor portion of the unit, check your air filter to make sure it is not blocked. A dirty air filter can cause your system to shut down because there is a lack of airflow.
  • Examine both the outdoor and indoor portions of your air conditioning system for signs of damage, loose connections or frayed wires. If you notice any of these potential issues, contact a professional to perform the appropriate repairs.
  • If the above suggestions did not solve your issue, get the model number from your unit so you can perform further research or have a professional help you with your Bryant AC troubleshooting. The model number will be marked on a sticker at the back of the unit, above the service valve connections.

Bryant Air Conditioner Maintenance

The best way to avoid future Bryant AC troubleshooting is to have regular maintenance performed on your system. An affordable and convenient maintenance plan will ensure your air conditioner is always ready when you need it. With scheduled maintenance from our Bryant specialists, you’ll protect your investment and keep your home comfortable.

Need help with your Bryant AC troubleshooting? Get in touch with us today! The expert technicians at Evam Canada are familiar with all makes and models, and are ready to assist with any questions or concerns you might have about your Bryant air conditioning system.

Evam CanadaBryant AC Troubleshooting Tips
read more

Air Conditioner Leaking Water

No comments

Have you discovered that your air conditioner is leaking water? There are a number of reasons this might occur, as well as a number of places where your AC may be leaking from. Here, the Evam team has assembled a list of troubleshooting tips so you can discover the source of the leak and take steps to solve the problem:

Outside Leaks

If you have noticed a puddle of water surrounding your outdoor compressor, follow these steps:

  • Consider when you are running your air conditioner. If it’s near the end of the cooling season and you are running your AC when it’s cooler outside, the coils can freeze over and cause the unit to leak water.
  • Your air conditioner could be allowing warm outside air in if it is not properly sealed. When this air converges with the cool air inside, condensation can form and result in excess moisture. A professional can seal your AC so this does not occur.
  • Check to see if your air conditioning unit is level. Occasionally, if an outdoor unit has been improperly installed on an uneven surface, this can cause water to leak and pool around the unit. A good air conditioner professional can check this for you and re-level it.

Inside Leaks

If you discover a leak near the indoor evaporator unit, follow these steps:

  • Check the condensate drain line for blockages from debris, algae or a buildup of dirt. Use a wet/dry vac to clear the line.
  • Look at your drain pan. If it is damaged or rusted in any way, its seal could be broken, allowing water to pass through. Replace the drain pan if necessary.
  • Examine the condensate pump. If your air conditioner is leaking water and it is located in your basement, it may have a condensate pump that moves the water outdoors. When the pump is broken, water can pool. It will need repair or replacement.
  • Make sure the drain line is properly connected. It can loosen over time and completely disconnect from your air conditioner, causing a leak. Tighten the fittings if possible, or replace the drain line completely.
  • Replace or clean your air filter. A dirty air filter blocks airflow over the evaporator coils, causing them to freeze. When they melt, this moisture drips into the condensate pan and it can overflow as a result.

If you have tried these troubleshooting tips and you still find your air conditioner leaking water, it’s a good idea to call in a pro. The air conditioner repair specialists at Evam Canada have experience in servicing all popular AC makes and models, so you can trust us to diagnose and repair the issue.

When you’re searching for AC repair in Mississauga and the GTA, Evam Canada is here to help! Contact us today to book an appointment and we’ll get your air conditioner running like new.

Evam CanadaAir Conditioner Leaking Water
read more

Payne Air Conditioner Troubleshooting

No comments

Payne Air Conditioner Troubleshooting Tips

Payne air conditioners continue to be a top choice for homeowners looking for an affordable and efficient air conditioning system. Since 1914, Payne has offered high-quality heating and cooling equipment in the United States and Canada, with a focus on savings, reliability and comfort.

Need assistance with your Payne air conditioner troubleshooting? Our expert AC technicians recommend the following troubleshooting tips as a first step if you find that your Payne air conditioner is not working as it should. The following steps should solve many of the most common AC issues. However, if you’re still experiencing problems, we recommend getting in touch with a professional!

  • If the compressor and condenser fan do not run on your Payne air conditioner, check that a circuit breaker has not been tripped. Check at the panel for any tripped breakers and reset them if necessary.
  • The next step in your Payne air conditioner troubleshooting should be a visual inspection of the indoor and outdoor equipment. Look at all wiring and connections to see if they are secure. Look for signs of damage, water leakage and other physical signs that your unit needs professional repair.
  • Remove the air filter and check for blockage. A very dirty air filter will shorten the life of your air conditioner, and can even cause it to shut off as a result of reduced airflow.
  • Ensure that your thermostat is turned from “heat” mode to “cool” mode. Once in “cool” mode, turn down the current temperature by 5 degrees to see if this causes your air conditioner to turn on.
  • Check the blower motor in your furnace to ensure it is running. The furnace switch should be in the “on” position even when your system is in cooling mode.

Payne Air Conditioner Maintenance

Once you’ve completed your Payne air conditioner troubleshooting or repairs, you can prevent issues in the future by opting for a regular AC maintenance plan. By scheduling expert maintenance for your air conditioning system, you’ll make sure it’s always ready to cool your home when you need it.

For more information on AC maintenance or Payne air conditioner troubleshooting, contact the professional team at Evam Canada. We’d be happy to schedule an appointment to have an expert take a look at your Payne air conditioner and get it working like new. We’re familiar with all makes and models, so our specialists are prepared to answer your questions!

Evam CanadaPayne Air Conditioner Troubleshooting
read more

Carrier Air Conditioning Repair & Troubleshooting

No comments

Carrier air conditioners have remained one of the biggest names in HVAC since founder Willis Carrier invented the first modern air conditioning system in 1902. Since then, thousands of Canadian home owners have trusted their comfort to Carrier AC units, which are known for their high energy-efficiency standards and reliability.

If you’re having issues with your AC, and are in need of Carrier air conditioning repair and troubleshooting tips, you’ve come to the right place. Our experts recommend the following steps to get your system working again, or to determine if it is in need of professional repairs:

  • Start by determining if power is getting to your air conditioning unit. Outside, check to see that power switch is in the “on” position. This switch can be found mounted to the exterior of your home, typically within a few feet of the AC unit. Indoors, check that a breaker has not been tripped in your home’s electrical panel. If you find a tripped breaker, flip it to the “on” position.
  • Make sure your furnace’s blower motor is running, ensuring that the switch is in the “on” position as well.
  • Check your thermostat to see if it is in “cool” mode, not “heat” mode, and that the desired temperature is set lower than the current temperature in your home.
  • Replace or clean your air filter. A clogged filter does not allow for proper airflow, and can result in your air conditioner shutting down.
  • Check that none of the return-air grilles in your home are blocked. If furniture or other items are blocking them, the reduced airflow can have an impact on your AC unit’s performance.
  • Similarly, ensure that all supply air registers throughout your home are not blocked, and are open and blowing air.
  • Examine all components of your air conditioning equipment, both indoors and out. If you notice any signs of damage, wear or loose connections, call a pro for assistance.

Carrier Air Conditioner Repair

If you’ve tried the above Carrier air conditioner repair and troubleshooting steps, but you’re still encountering problems, it’s time to call in a pro for expert repairs. At Evam Canada, we specialize in making repairs to all Carrier AC makes and models. Our technicians are highly trained to diagnose and fix all air conditioning problems so your system can get back up and running to keep your home comfortable.

Have questions about your Carrier air conditioner or need troubleshooting tips? Contact Evam Canada. We’re here to help residents of Mississauga and the GTA with all their air conditioning needs!

Evam CanadaCarrier Air Conditioning Repair & Troubleshooting
read more